Maintenance—Every 500 Hours Change Engine Oil and Filter (450H, 550H Later Machines) 1. Run engine to warm oil. Stop engine. 2. Remove cap screws and remove oil pan access cover (located below engine). T117875B —UN—03NOV98 3. Remove drain plug or open drain valve, if equipped, and allow oil to drain into a container. Dispose of waste oil properly. 4. Install drain plug. 5. Remove oil filter (A). 6. Apply thin film of oil to gasket of new filter. 7. Install new filter. Turn filter clockwise by hand until gasket touches mounting surface. A—Oil Filter 10. Run engine for 2 minutes and then stop engine. Check for leaks around filter and drain plug. Tighten enough only to stop leaks. 8.
Tighten 1/2 turn more. 9. Fill engine with oil. See Diesel Engine Oil. (Section 3-1.) 11. Check oil level. Specification Engine Oil (Including Filter)—Capacity................................................14 L (15 qt) Approximate HG31779,00000F7 -19-11SEP02-1/1 Check Air Intake Hose 1. Check hose (A) for cracks. 2. Check for loose hose clamps. 3. Replace damaged or missing parts. A—Hose T118663B —UN—02DEC98 Turbocharged Engine Shown 03T,80,K91 -19-05FEB13-1/1 3-7-1 070813 PN=102