Maintenance—Every 2000 Hours 2. Remove transmission drain access panel (A). 3. Attach hose to drain valve (B), if equipped, or remove drain plug and route hose to container. Drain oil. Dispose of waste oil properly. 4. Put shallow pan on battery cover to prevent oil from transmission filter from dripping on battery(ies). T118650B —UN—02DEC98 A—Access Panel B—Drain Valve 450H Shown T117897C —UN—12NOV98 Optional Drain Valve Shown HG31779,00000D0 -19-06JUN05-2/3 5. Remove oil filter (A) by turning counterclockwise. 6. Apply a thin film of oil to gasket of new filter. 7. Install new filter. Turn filter clockwise by hand until gasket touches mounting surface. 8. Tighten additional 1/2 turn.
T117891B —UN—03NOV98 9. Fill reservoir with oil. See Transmission and Hydraulic Oil. (Section 3-1.) Specification Transmission Oil Reservoir—Capacity............................................................53 L (14 gal) 10. Check O-ring on fill cap and install fill cap. A—Oil Filter B—Sight Glass 11. Start engine and run for 2 minutes. Stop engine and check for leaks around filter base. Tighten filter only enough to stop leaks. 12. Check oil level in sight glass tube (B). Oil level should be between the ADD and FULL marks. Add oil if necessary. HG31779,00000D0 -19-06JUN05-3/3 3-9-3 070813 PN=116