Miscellaneous—Machine Drain the Cooling System Every three years or 3000 hours, if John Deere Coolant is used, drain and flush cooling system using commercial products, replace thermostats, and fill with new coolant. CAUTION: DO NOT remove the radiator fill cap unless the engine is cool. Then loosen the cap slowly to the stop. Release all pressure before removing the cap. T118437 —UN—12NOV98 1. Release pressure and then remove radiator cap (A). A—Air Screen 450H Shown CED,OUO1032,781 -19-27JAN00-1/2 NOTE: Allow coolant to drain into a container. Dispose of waste coolant properly. 2. Open radiator drain valve (A). 3. Open drain valve (B) to drain engine block. T117900B —UN—05NOV98 4.
Flush system using commercial product. 5. Close all drain valves. 6. Add new coolant. See Diesel Engine Coolant. (Section 3-1.) A—Radiator Drain Valve B—Engine Drain Valve T117901B —UN—05NOV98 CED,OUO1032,781 -19-27JAN00-2/2 4-1-1 070813 PN=117