Miscellaneous—Machine Fill the Cooling System CAUTION: DO NOT remove radiator cap unless engine is cool. Turn the cap slowly to the stop. Release all pressure before removing cap. With engine COLD, coolant level must be between HOT and COLD marks on recovery tank (A). TS281 —UN—15APR13 If coolant is below COLD mark, add coolant to the recovery tank. If there is no coolant in recovery tank, add coolant to recovery tank and radiator. FREEZING TEMPERATURES: Fill with permanent-type, low silicate, ethylene glycol antifreeze (without stop-leak additive) and clean, soft water. Add TY16004 John Deere Coolant Conditioner or equivalent. IMPORTANT:
Use only permanent-type, low silicate, ethylene glycol base antifreeze in coolant solution. Other types of antifreeze may damage cylinder seals. T117479 —UN—20OCT98 NOTE: All machines are shipped from the factory with a 50-50 mixtures (antifreeze and soft water) for protection to (–30°F). Adjust mixture accordingly to provide freeze protection for your machine. 450H Shown A—Recovery Tank CED,OUO1032,782 -19-24APR99-1/1 Clean the Engine Air Precleaner Screen To clean the engine air screen (A), remove hose clamp and bowl. Shake bowl to remove debris. IMPORTANT: The engine air screen removes only part of the dirt as air goes into the engine. You must still clean the air cleaner regularly.
T117837B —UN—21OCT98 A—Air Screen Turbocharged Engine Shown CED,OUO1032,1027 -19-02JUN03-1/1 Replace Engine Vibration Damper first, or whenever crankshaft is replaced. See your authorized dealer. The damper assembly is not repairable and should be replaced every 5 years or 4500 hours, whichever occurs CED,TX03768,2668 -19-29OCT99-1/1 4-1-2 070813 PN=118