John Deere 450H, 550H, 650H — Releasing the Park Brake to Tow the Machine

Operation—Operating The Machine Releasing the Park Brake to Tow the Machine Order CO 2 Inflation Kit and attaching hardware through your authorized dealer. CAUTION: Prevent possible injury from unexpected machine movement. Do not try to start engine when towing. Extensive machine damage and/or personal injury may result. IMPORTANT: DO NOT tow machine faster than 2.4 km/h (1.5 mph) or extensive machine damage may result. 1. Stop engine. 2. Move park lock lever down to unlocked position. 3. Remove rubber mat and floor plate from operator's station. NOTE: Multi-function valves can be turned out using a 1 1/4 in. socket and a flexible head ratchet. T118899B —UN—16DEC98 4. TO TOW MACHINE FORWARD:

Both front and rear pump top multi-function relief valves (1) MUST be turned out (counterclockwise) 1/2 to 1 turn and blade must be raised off the ground. (If engine will crank but will not start, blade can be raised by cranking engine while holding blade raise function on control valve.) TO TOW MACHINE IN REVERSE: Both front and rear pump bottom multi-function valves (2) MUST be turned out (counterclockwise) 1/2 to 1 turn. 5. Disconnect quick coupler (3). 1— Forward Multi-Function Valve (top) 2— Reverse Multi-Function Valve (bottom) 3— Quick Coupler T119030B —UN—16DEC98 CED,OUTX466,1206 -19-24APR99-1/3 6. Assemble the CO 2 Inflation Kit and attaching hardware. 7.

Install CO 2 assembly to hose coupler end. 1— AM102420 Male Quick Coupler 2— Parker Adapter 0502-6-4 ( 9/16 in. to 1/4 in. pipe) 3— R27908 Adapter (1/4 in. to 1/8 in. pipe) 4— AT119575 Adapter 5— AT221000 CO 2 Inflation Kit (Includes inflation canister and cartridge) T119431B —UN—07JAN99 CO2 Inflation Kit and Attaching Hardware Continued on next page CED,OUTX466,1206 -19-24APR99-2/3 2-2-37 070813 PN=75