Operation—Operating The Machine IMPORTANT: Release brakes using CO 2 with a MINIMUM pressure of 200 psi and a MAXIMUM pressure of 400 psi. DO NOT exceed the limits of the charge pressure gauge on dash. NOTE: The brakes initially start to release at approximately 150 psi and are fully released at approximately 190 psi. With the park lock lever down, monitor the pressure on the transmission oil pressure gauge on the instrument panel. 8. While sitting in the operator's seat, watch charge pressure gauge on dash when releasing brakes using CO 2 assembly. Pressurize brake circuit to approximately 200 psi. IMPORTANT:
DO NOT tow machine faster than 2.4 km/h (1.5 mph) or extensive machine damage may result. NOTE: Engine does not have to be running to tow machine. 9. Tow the machine. T119432B —UN—07JAN99 10. After the machine is towed, step on the brakes to release pressure. Remove CO 2 assembly and reconnect coupler. Tighten multi-function valve lock nut to 79 N·m (58 lb-ft). See your authorized dealer for repair. Specification Multi-Function Valve Lock Nut—Torque................................................................... 79 N·m (58 lb-ft) T121134 —UN—20APR99 CED,OUTX466,1206 -19-24APR99-3/3 2-2-38 070813 PN=76