John Deere 450H, 550H, 650H — Adjust Track Sag

Maintenance—As Required Adjust Track Sag CAUTION: Grease for track adjuster cylinder is under high pressure. Never remove grease fitting to release the grease. If grease does not escape immediately from vent hole when fitting has been loosened, slowly drive unit in forward and reverse until grease escapes. DO NOT disassemble parts unless you know the correct procedure and have correct tools. (See your authorized dealer.) If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or gangrene may result.

Doctors unfamiliar with this type of injury may call the Deere & Company Medical Department in Moline, Illinois, or other knowledgeable medical source. T118011B —UN—11NOV98 Decrease Track Sag: 1. Remove access plug (A). Remove Plug A—Access Plug Continued on next page CED,OUO1032,1028 -19-12JAN12-1/2 3-3-3 070813 PN=92