Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine 4244 Steps to Assemble Oil-Gas Separator Assembling steps are contrary to disassembling ones. Do not mix up the rubber hoses and hoses joints (refer to Fig. 4-5), connect each hose to the engine properly. 425 Disassembly, Inspection, Maintenance and Assembly of Hanger Plates 4251 Exploded View of Hanger Plates Hexagon bolt Rear hanger plate Hexagon bolt Front hanger plate Fig. 4-6 Exploded view of lifting eye 4252 Steps to Disassemble Hanger Plates Hanger plates are fixed on cylinder cover with bolts, used to hang the engine.

Firstly remove the parts fixed on the plate, such as oil-gas separator, and then remove the hexagon bolts orderly, take down the plate. 4253 Inspection and Maintenance of Hanger Plates Check whether there is crack or big distortion on hanger plates, check whether the hexagon bolts are in good condition. Replace the damaged parts to avoid accidents. 42