Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine 3) Rotate the engine for 360°, so that cylinder 6 can be in compression TDC, adjust intake valve clearance of No. 6, 5, 3 cylinder and exhaust valve clearance of No. 6, 4, 2 cylinder, and EVB valve clearance. 4) Check valve timing of cylinder 1 in cold state, intake valve TDC 18°~23°, exhaust valve TDC 20°~25°. 454 Disassembly, Inspection, Maintenance and Assembly of Valve Tappet and Pushrod 4541 Exploded View of Valve Tappet and Pushrod Pushrod Cylinder cover Engine block Tappet Fig.

4-47 Exploded view of valve tappet and pushrod 4542 Steps to Disassemble Valve Tappet and Pushrod (1) After removing rockers and rocker shafts, directly take out pushrods, place them orderly; (2) After removing cylinder covers (refer to disassembly of cylinder cover for details), directly take out valve tappets, place them orderly; 4543 Inspection and Maintenance of Valve Tappet and Pushrod (1) Clean up valve tappet and pushrod; (2) Check whether oil channels of valve tappet and pushrod are unblocked; (3) Check whether pushrod is crooked, check wear condition of its outside surface; 82