Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine (4) Check whether pushrod two ends are worn; (5) Check whether valve tappet surface and undersurface are worn; (6) Check whether valve tappet inner socket head is worn. 4544 Steps to Assemble Valve Tappet and Pushrod (1) Check valve tappets and pushrods, replace them if necessary.

Before installing the tappets, it must be cleaned with compressed air, and check whether the oil channels are unblocked; (2) Apply clean lubricating oil evenly on valve tappet fitting surfaces; (3) Install valve tappets into engine block tappet-fitting holes (4) After assembling cylinder covers (refer to assembly of cylinder cover for details), clean the pushrods with compressed air and check whether the oil channels are unblocked; (5) Apply clean lubricating oil on pushrod and ensure the round head is applied with sufficient oil. (6) Install pushrod, put the pushrod into valve tappet through cylinder cover.

455 Disassembly, Inspection, Maintenance and Assembly of Valve 4551 Exploded View of Valve Valve cap Valve lock clamp Upper valve spring seat Valve inner spring Valve outer spring Lower valve spring seat Valve Fig. 4-48 Exploded view of valve 83