Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn 13 mm If reinstalling the removed pump, install the pump onto the engine. Rotate the pump to align the scribe marks. Tighten the three mounting nuts. Caution: The pump shaft must be unlocked after installation to prevent pump damage. Torque Value: 24 N • m [18 ft-lb] If a new or rebuilt pump is being installed, permanently mark the injection pump flange to match the mark on the gear housing. 14 mm Loosen the CAV pump lockscrew and position the special washer behind the lockscrew head. Tighten the pump lock screw. Torque Value:

20N • m [15 ft-lb] 116 / 167 pages 13 mm If installing a new or rebuilt pump without scribe marks,take up gear lash by rotating the pump against the direction of drive rotation.