TIC LEXION 480-405 SAUER hydrostatic drive Designations 751 - External feed valve (non-return valve) Y124 - Ground drive hydraulic motor brake restrictor (HBM) Description of function Y124 Ground drive hydraulic motor brake restrictor (HBM) The ground drive hydraulic motor brake restrictor (HBM) solenoid valve (Y124) is fitted to the ground drive variable displacement pump (210). It avoids pump damage due to excessive speed of the diesel engine. When travelling downhill, the ground drive variable displacement motor (211) provides an increased volume flow to the ground drive variable displacement pump (210).
This makes the speeds of the ground drive variable displacement pump (210) and of the diesel engine rise. At a diesel engine speed of > 2300 rpm, the ground drive hydraulic motor brake restrictor (HBM) solenoid valve (Y124) is energised, actuates and the working hydraulics pressure moves piston K to the right (see drawing H 1117). The restricting effect produced generates a ram pressure of approx. 180 bar upstream of the restrictor. With this ram pressure and a pressure of approx. 450 bar on the opposite pump side, the pressure difference at the ground drive variable displacement pump (210) is reduced. This reduces both the torque load of the diesel engine and its speed.
At a diesel engine speed of restrictor (HBM) solenoid valve (Y124) is de-energised, the restricting effect due to the piston K disappears. 751 External feed valve (non-return valve) When the ground drive hydraulic motor brake restrictor (HBM) solenoid valve (Y124) is active, a ram pressure of approx. 180 bar is generated upstream of the brake restrictor valve. In this situation, the usual feed process inside the pump is not possible. The external feed valve (non-return valve) (751) is now used for an external feed from the feed pressure circuit. 03/2004 7-33