19-94 19-94 Electrical System Troubleshooting Inspection 1: Check the condition of the switch. Ignition key switch ON (engine stopped) Lift switch (I/O monitor: MU·MD) Standard: Inspection 2: Carry out individual continuity inspection of the lift lever switch (still installed on the vehicle). Ignition key switch OFF, disconnect A14 Standard: (Switch side) Inspection 3: Carry out individual continuity inspection of the lift lever switch (removed from the vehicle). Ignition key switch OFF, disconnect A14 Standard: (Switch side) 3 1 2 4 A14 Inspection 4: Harness continuity and short circuit inspection Ignition key switch OFF, disconnect A14 and A20 Standard:
Section 19 Lever in neutral position Lever in raised position Lever in lowered position MU (Raising switch) 0 1 0 MD (Lowering switch) 0 0 1 Lever in neutral position Lever in raised position Lever in lowered position A14-3 ~ A14-4 No continuity No continuity Continuity A14-1 ~ A14-2 No continuity Continuity No continuity Switch ON Switch OFF A14-3 ~ A14-4 Continuity No continuity A14-1 ~ A14-2 Continuity No continuity A20-22 ~ Frame No continuity A20-23 ~ Frame No continuity A20-22 ~ A20-1 No continuity A20-23 ~ A20-1 No continuity A20-22 ~ A20-33 No continuity