Maintenance - Section 4 OM4035.2 02/03 Page 4- 18 Automatic Lube System INJECTOR OPERATION The injector piston (2) is in its normal or “rest” position. The discharge chamber (3) is filled with lubricant from the previous cycle. Under the pressure of incoming lu- bricant (6), the slide valve (5) is about to open the passage (4) leading to the mea- suring chamber (1) above the injector pis- STAGE 1. When the slide valve (5) uncovers the pas- sage (4), lubricant (6) is admitted to the measuring chamber (1) above the injector piston (2) which forces lubricant from the discharge chamber (3) through the outlet STAGE 2. STAGE 3.
As the injector piston (2) completes its stroke, it pushes the slide valve (5) past the passage (4), cutting off further admission of lubricant (6) to the passage (4) and mea- suring chamber (1). The injector piston (2) and slide valve (5) remain in this position until lubricant pressure in the supply line (6) STAGE 4. After venting, the injector spring expands, causing the slide valve (5) to move, so that the passage (4) and discharge chamber (3) are connected by a valve port (8).
Further expansion of the spring causes the piston to move upward, forcing the lubricant in the measuring chamber (1) through the pas- sage (4) and valve port (8) to refill the Injector is now ready for the next cycle. INJE The injecto “rest” positi is filled wit cycle. Unde bricant (6), open the pa suring cham ton (2). When the sl sage (4), lu measuring piston (2) w discharge c port (7) to t As the inje stroke, it pu stroke, it p passage ( of lubrican suring cha and slide until lubric is vented. After venti causing th the passag are conne expansion to move u measuring sage (4) discharge Injector is passage ( of lubrican suring cha and slide until lubric is vented.
After venti causing th the passag are conne expansion to move u measuring sage (4) discharge Injector is ION s normal or hamber (3) e previous ncoming lu- is about to to the mea- injector pis- ers the pas- itted to the the injector nt from the h the outlet mpletes its (5) past the past the mission nd mea- ston (2) position line (6) xpands, so that mber (3) Further e piston nt in the he pas- efill the ycle.