Komatsu — 500 HOUR LUBRICATION AND MAINTENANCE CHECKS

Maintenance - Section 4 OM4035.1 01/04 Page 4-10 Lubrication and Service 500 HOUR LUBRICATION AND MAINTENANCE CHECKS Maintenance for every 10, 50, 100 & 250 hour Lubrica- tion and Maintenance Checks should also be carried out at this time. Truck Serial Number __________________________ Site Unit Number _____________________________ Date: __________ Hour Meter __________________ Name of Service Person _______________________ NOTE: "Lube Key" references are to the Lubrica- tion Specification Chart. 1. FINAL DRIVE CASE BREATHERS - Remove breather elements for motorized wheels and clean or replace elements. 2. HYDRAULIC SYSTEM FILTERS - Replace filter ele- ments. Check oil level.

Add oil as necessary. Lube Key "B". 3. HYDRAIR® SUSPENSION - Check for proper piston extension (front and rear). 4. THROTTLE AND BRAKE PEDAL (NOT SHOWN) - Lubricate treadle roller and hinge pins with lubricating oil. Lift boot from mounting plate and apply a few drops of oil between mounting plate and plunger. Lube Key "B". 5. HYDRAULIC TANK BREATHER - Replace breather. 6. FRONT WHEELS - Check front wheel bearing pre- load 500 hours after truck commissioning (and at 500 hours after each rebuild) as per Section G (in the ser- vice manual for Disassembly and Assembly proce- dures) and every 5,000 hours there after. COMMENTS CHECKED INITIALS