OM4035.1 01/04 Maintenance - Section 4 Lubrication and Service Page 4-11 1000 HOUR LUBRICATION AND MAINTENANCE CHECKS Maintenance for every 10, 50, 100, 250 & 500 hour Lubrication and Maintenance Checks should also be carried out at this time. Truck Serial Number __________________________ Site Unit Number _____________________________ Date: __________ Hour Meter __________________ Name of Service Person _______________________ NOTE: "Lube Key" references are to the Lubrica- tion Specification Chart. 1. HYDRAULIC TANK - Drain hydraulic oil and clean inlet strainer. Refill tank with new oil, approximate capacity 134 gal. (507 l). Use Lube Key "B". 2.
RADIATOR - Clean cooling system with a quality cleaning compound. Flush with water. Refill system with DCA or anti-freeze and water solution. Check Cooling System Recommendation Chart for correct mixture. 3. FUEL TANK - Remove breather and clean in sol- vent. Dry with air pressure and reinstall. 4. ENGINE - Remove, clean and dry crankcase breather elements. 5. OPERATOR'S SEAT - Apply grease to slide rails. Use Lube Key "D". COMMENTS CHECKED INITIALS