. MAINTENANCE MAINTENANCE PROCEDURE CHECK SWING PINION GREASE LEVEL, ADD GREASE gal 4 - 57 19. After re placing th e filter car tridge, start th e engin e and ru n it a t low idling for 10 minut Check f or leakag e of oil fro m the f ilter se al surfac e and tr anparent cap mounting. If any oil is leaking, check the tighteni ng of the f ilter cartri If there is still oil leakage, r epeat remove foreign material in the packi ng surface is found, r eplace it with a new cartridge and rep eat Steps 8 - 19 to install it. 1. Remov e covers ( 1) and (2) 2. Remov e bolts (3) (2 bolts) o n the t op of th e revolvi ng fram e and remove cover (4) . 3.
Insert a grease scale into in the port the grea ion where se and check the pinion pas that the ses is at height least 1 of the 4 mm (0.6 in). re grease if necessary. if the grease is milky white. If it is milky white, it is ary to change the grease. Please contact your u distributor. Add mo re grease if necess 4. Check if the gre necess ary to c Komats u distribu The tot al amount (29 lb)] : 14.5 liters (1 3.0 kg) [3.83 U 5. Install c over (4) w ith bolts ( 6. Install c overs (1)