. MAINTENANCE SERVICE PROCEDURE EVERY 1000 HOURS SERVICE REPLACE FUEL FILTER CARTRIDGE (MACHINES EQUIPPED WITH ADDITIONAL FUEL FILTER CARTRIDGE) WARNING to remove it. 4 - 63 Maintenance f or every 250 and 500 ho urs service should b e carried out at the same tim After the eng ine has been operated, all pa rts are at high temperature, so do not replace the filter im mediately. Wait for all parts to cool down before starting the operatio n. gine fuel piping system when the engine is running.
High pressur e is generated inside the en gine fuel piping system When replac ing the filter, wait for at leas t 30 seconds after stopping the engine to let the intern al pressure go down before replacing the filter. any fire or flame close. hen opening the air bleed plug in the fuel filter head. It is still under pressure, so fuel may spurt out. Do not bring Be careful w hen opening the air bleed pl ug in the fuel filter head . It is still under pressure, so fu NOTICE Genuine Kom atsu fuel filter cartridges u se a special filter that has highly efficient filtering abili ty. When replacing the filter cartridge, alw ays use a genuine Komats u part.
The common rail fuel injection system u sed on this machine co nsists of more precise parts tha n the conventional injection pump and no zzle. If any part ot her than a genuine Komatsu filter cartridge is used, dust or dirt may get in and caus e problems with the injection system. Alw ays avoid using substitute p arts. When carryin g out inspection or mainten ance of the fuel system , pay more attention than norma l to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. Container t Prepare a fi 1. Set the co ntainer under the filter ca rtridge to catch the d oil. 2. Close valv e (1) of fuel strainer part 3.
Remove t After drain he drain plug at the botto ing fuel, tighten the drain 4. Using a fil ter wrench, turn filter cart