Komatsu — USING SWITCH TO CHANGE BETWEEN FORWARD AND REVERSE

OPTIONAL ATTACHMENTS DIRECTIONAL SELECTOR LAMP This lamp (4) displays the position of the directional selector switch under the following conditions. Directional selector switch operation switch: ON position Directional lever: N position F lights up: FORWARD N lights up: NEUTRAL R lights up: REVERSE Directional lever: Neutral position Directional selector actuation switch (3): ON position Directional selector switch (2): Forward or Reverse position When the starting switch is turned to the ON position with the levers and switches in the following condition, all directional lever positional pilot lamps (4) will go out.

If directional selector switch (2) is then set to the N position, directional lever posi- tional pilot lamps (4) display the normal condition “N“. USING SWITCH TO CHANGE BETWEEN FORWARD AND REVERSE When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so be particularly careful when changing direction to travel in reverse. Do not switch between FORWARD and REVERSE when traveling at high speed. When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently, then change the direction of travel. (Max.speed for changing direction:

13 km/h (8.1 MPH)) When the directional selector switch actuation switch (3) is at the ON position, if the directional lever (1) is operated to FORWARD or REVERSE, the machine will travel in forward or reverse according to the operation of the directional lever, regardless of the position of the directional selector switch (2). Priority is given to the operation of the directional lever, so be careful when operating. 1. Place the directional lever (1) at the N position. 2. Place the directional selector switch (2) at the N position. 5-10 WA320PT-5L