DRESSTA TD20H98/1E — 4.7. STOPPING THE ENGINE

SECTION 4 OPERATING Page 20 4.7. STOPPING THE ENGINE 1. Ripper Control Lever 2. Brake and Decelerator Pedal 3. Transmission Shift Lever 4. Transmission Neutral Lock Lever 5. Engine Speed and Shut Down Lever 6. Brake Lock Knob 7. Engine Shut Down Position 8. Electrical System Master Switch 9. Engine Coolant Temperature Gauge Fig. 4.16. Stopping the Engine 1. Using control lever (1) lower all mounted equipment to the ground. Depress the brake and decelerator pedal (2) and place transmission shift lever (3) into NEUTRAL. 2. Apply transmission neutral lock lever (4). 3.

If engine operated under load, operate the engine at idle speed for 3 to 5 minutes to allow the engine to cool down in gradual and uniform manner. 4. Depress and lock brake and decelerator pedal. Fig. 4.17. Engine Speed and Shut Down Control Lever IMPORTANT: Immediate engine shut down after operation under load may result in engine damage. TD-20H DRESSTA