OPERATING SECTION 4 Page 21 4.7. STOPPING THE ENGINE 1. Move the engine speed and shut down lever to large notched OFF position – the electrovalve will shut down the engine. 2. Turn the electrical master switch in OFF position. 4.8. DRIVING THE MACHINE IMPORTANT: Read the SAFETY PRECAUTIONS in Section 2 before operating the machine. IMPORTANT: Before operating check all instruments. Fig. 4.18. Driving the Machine 1. Engine Speed and Shut Down Lever 2. Brake and Decelerator Pedal 3. Transmission Neutral Lock Lever 4. Transmission Shift Lever 5. Brake Lock Lever WARNING! Never haul passengers. Only the operator should be on the machine when it is moving. WARNING!
Sit in the operator seat before operating the controls. Keep hands and footwear free of grease, water and mud to insure positive control movements. WARNING! Before operating the machine adjust the seat to allow full access of all controls and fasten the seat belt. Failure to do so could result in serious injuries or death. WARNING! Never get on or off the machine while it is moving because serious injury or death could result. DRESSTA TD-20H