DRESSTA TD20H98/1E — 4.18.2. TRANSPORTING, PILING OR LOADING

OPERATING SECTION 4 Page 37 4.18. OPERATING TECHNIQUES 4.18.2. TRANSPORTING, PILING OR LOADING The transporting of material with a bulldozer is not always a most economical method. Natural ridges, a window formed by side blade spillage on earlier passes or side-by-side, dozing will improve the productivity (Fig 4.43). Where the quantity of material or distance involved becomes excessive, a loader, scraper or truck should be considered. Fig. 4.43. Side-by-Side Dozing A usual method of piling is shown in Fig. 4.44. When the piling reaches stages “D” or “E” the operator may elect to continue one of the other depending on height or area desired.

When the machine is used as a pusher, aiding scraper loading (Fig. 4.45), the machine power must be carefully controlled. Excessive “push” effort can cause the scraper unit to “jackknife”, with resulting injury or damage. On turns, be sure the blade of the pusher tractor does not come in contact with the rear wheels of the scraper. Fig. 4.44. A Usual Method of Piling DRESSTA TD-20H