John Deere Series 300 (3029,4039,4045,6059,6068) — John Deere Series 300 (3029,4039,4045,6059,6068) User Manual

REFERENCE ONLY S11,OMLM,AH -19-17AUG93 S11,OMLM,AI -19-19MAR91 S 11 ,OMSE.AP -19-09AUG94 140497 PN=B1 Service/As Required Inspect filter for damage after cleaning or to determine if it is practical to clean filter. 1. Hold a bright light inside element (A) and check carefully for holes. Discard any element which shows the smallest hole or rupture. 3. Be sure filter gasket (C) is in good condition. If gasket is damaged or missing, replace element. 1. Inspect belts for cracks, fraying, or stretched out areas. Replace if necessary. (See FAN AND ALTERNATOR BELTS TENSION OR REPLACEMENT in Lubrication and Maintenance/250 Hour Section.) 73 INSPECTING PRIMARY FILTER ELEMENT 2.

Be sure outer screen (B) is not dented. Vibration would quickly wear a hole in filter. If the filter is to be stored for later use, place it in a plastic bag to protect it from dust and damage. Seal element in a plastic bag and store in shipping container to protect against dust and damage. IMPORT ANT: Air cleaner element MUST BE DRY before storing in plastic bag. REPLACE FAN AND ALTERNATOR BELTS ELEMENT STORAGE