hitachi — Diagnosing Procedure

TROUBLESHOOTING / Diagnosing Procedure Note that the fault codes displayed do not necessarily indicate machine trouble. The controller stores even temporary electrical malfunctions, such as a drop in battery output voltage or disconnections of the switches, sensors, etc., for inspections. For this reason, the “RETRIAL” is required to erase the accumulated fault codes from the controller memory and to confirm if any fault codes are indicated after the “RETRIAL”. 6. Trace possible causes Before reaching a conclusion, check the most likely causes again. Try to identify the actual cause of the trouble.

Based on your conclusion, make a plan for appropriate repairs to avoid consequent malfunctions. T5-1-5