TROUBLESHOOTING / Troubleshooting A MC FAULT CODE 11313 Disconnect connector MC-C in MC. Check for continuity between terminal #C23 of harness end of connector and terminal #2 of harness end of connector in pressure sensor. NO Open circuit in harnees between MC and pressure sensor. YES Disconnect connector of pressure sensor. Check if voltage between terminals #1 and #3 of harness end of connector is 5 ± 0.5 V. Open circuit in harness between MC and pressure sensor (terminal #3). Switch pressure sensor with normal pressure sensor and retry. Check if fault code disappears. Open circuit in harness between MC and pressure sensor (terminal #1). NO · Key switch:
ON YES Check if voltage between terminal #1 of harness end of connector in pressure sensor and vehicle frame is specification. · Key switch: ON · Specification: 5 ± 0.5 V NO NO Faulty pressure sensor. YES Connector (Harness end of connector viewed from the open end side) MC Connector MC-C Parking Brake Pressure Sensor Connector C1 C10 T5-5-80 Fault Code Trouble Cause Influenced Control 11313-3 Abnormal Parking Brake Pressure Sensor High Voltage Output voltage: 4.75 V or higher • Parking Brake Indicator Control 11313-4 Abnormal Parking Brake Pressure Sensor Low Voltage Output voltage: Less than 0.25 V • Parking Brake Indicator Control Faulty MC. YES 23 C31 #C23 1 2 3