TROUBLESHOOTING / Troubleshooting B T5-6-6 Parts Function Symptoms in control system when trouble oc- curs. Symptoms in machine operation when trouble occurs. Accelerator Pedal Sensor • Sends the command signal on accelerator depressing to MC. • MC fixes engine speed to 1000 min-1. • As the accelerator pedal is depressed and engine speed does not increase, the machine moves slowly. Coolant Temperature Sensor • Sends the signal on coolant temperature to the monitor unit. • Coolant temperature cannot be detected. • Auto warming-up control is operated abnormally. • The coolant temperature gauge is operated abnormally.
Hydraulic Oil Level Sen- sor • Sends the signal on hydrauli oil level to the monitor unit. • Hydraulic oil level cannot be detected. • The brake oil indicator is operated abnormally. Air Filter Restriction Switch • Sends the signal on air filter in-take pressure to the monitor unit. • Air filter in-take pressure cannot be detected. • The air filter restriction indicator is operated abnormally. Fuel Level Sensor • Sends the signal on fuel level to the monitor unit. • Fuel level cannot be detected. • The fuel gauge is operated abnormally. Hydraulic Oil Tempera- ture Sensor • Sends the signal on hydraulic oil temperature to MC. • Hydraulic oil temperature cannot be detected.
• MC fixes the cooling fan to the maximum speed. • Engine auto warming-up control cannot be operated. • Altough outside air temperature is high, auto warming-up control is operated. • Hydraulic drive fan cooling control cannot be operated. (Cooling fan: Maximum speed) • The hydraulic oil temperature indicator is operated abnormally. Bucket Proximity Switch • Uses for bucket auto leveler control. • ON: While the bar is passed in front, OFF: When the bar is out of front • The bar cannot be detected. • The bucket auto leveler cannot be used. Lift Arm Proximity Switch • Uses for lift arm height kickout control. • ON: While the plate is passed in front, OFF:
When the plate is out of front • The plate cannot be detected. • The lift arm height kickout cannot be used. Lift Arm Angle Sensor (Optional) • Uses for lift arm auto leveler control (optional). • Sends the signal on lift arm operating angle to MC. • Lift arm operating angle cannot be detected. • The lift arm auto leveler control (optional) cannot be used. Torque Converter Oil Temperature Sensor (Torque Converter Cooler Piping Upper) • Sends the signal on torque converter oil temperature to the monitor unit. • Torque converter oil temperature cannot be detected. • Hydraulic drive fan cooling control cannot be operated. (Cooling fan:
Maximum speed) • The transmission oil temperature gauge is operated abnormally. Outside Air Temperature Sensor (for Air Condi- tioner) • Sends the signal on air temperature to the air conditioner controller. • Auto temperature control in the air conditioner cannot be operated. • The cab inside becomes cold or hot rapidly.