TROUBLESHOOTING / Troubleshooting B T5-6-8 Parts Function Symptoms in control system when trouble oc- curs. Symptoms in machine operation when trouble occurs. Outside Air Temperature Sensor (for MC) • Sends the signal on air temperature to MC. • Air temperature cannot be detected. • Just after the engine starts, the air conditioning is weak with the air conditioner switch ON. (No cooled wind blows.) Torque Converter Input Speed Sensor • Sends the signal on torque converter inlet speed to MC. • Torque converter inlet speed cannot be detected. • As torque decrese control cannot be operated, the engine has a load during combined operation of travel and front attachment.
• Gear shifting shock may become big when traveling. Torque Converter Output Speed Sensor • Sends the signal on torque converter outlet speed to MC. • Torque converter outlet speed cannot be detected. • As torque decrese control cannot be operated, the engine has a load during combined operation of travel and front attachment. • Gear shifting shock may become big when traveling Transmission Control Valve • Is installed to the transmission. • Decreases oil presssure from the drive unit pump and supplies clutch connection pressure. • The spool moves according to the transmission proportional solenoid valve and clutch connection pressure is supplied to the certain clutch pack.
• Speed gear cannot be shifted normally. • The following troubles may occur according to malfunction. As the serious accident including the transmission break occurs, judge the trouble carefully. • Although the forward/reverse lever is in Neutral, the machine moves. • Although the accelerator pedal is depressed, the machine moves slowly or does not move at all. At this time, although engine speed increases, the engine has a heavy load. Transmission Propor- tional Solenoid Valve • Is installed to the transmission control valve. • Consists of 6 solenoid valves for forward, reverse, first gear, second gear, third gear and fourth gear.
Is operated by the command signal from MC and shifts the spool in transmission control valve. • Speed gear cannot be shifted normally. • Travel speed is fixed to first gear or second gear due to the abnormal proportional solenoid valve. • Big shock occurs when speed gear is shifted. • Speed gear is fixed to first gear or second gear. Transmission Oil Tem- perature Sensor • Is installed to the transmission. • Sends the signal on oil temperature to MC. • Transmission oil temperature cannot be detected. • Transmission oil temperature is not displayed on Dr. ZX and the monitor. • Transmission learning cannot be performed.