hitachi — Relationship between Machine TroubleSymptoms and Related Parts

TROUBLESHOOTING / Troubleshooting B T5-6-9 Evaluation by Fault Code Evaluation by Monitor Function NOTE Descriptions of Control (Operational Principle Section in T/M) - MC Monitor Item: Outside air temperature • The cooling fan rotates slowly just after the engine starts. At this time, if the air conditoner switch is turned ON, the air conditioning becomes weak. When air temperature is high and hydraulic oil and coolant temeprature are low, if the air conditoner switch is turned ON, MC increases target fan speed. - MC: 11105 MC Monitor Item:

Actual engine speed, Engine speed deviation, Torque converter speed ratio (possible to be displayed by using the service mode on monitor) - T2-1, T3-9 MC: 11601 MC Monitor Item: Torque converter output speed, Torque converter speed ratio - T2-1, T3-9 - - - T3-9 MC: 11414, 11415, 11416, 11417, 11418, 11419 MC monitor Item: T/M clutch proportional solenoid valve, T/M clutch proportional so- lenoid valve FB (for each for forward, reverse, first gear, second gear, third gear and fourth gear) • If the travel mode siwtch is in Auto, only speed gear which is selected by using the shift switch can be operated. This condition is normal. T2-1, T3-9 Monitor Unit: 13312 Monitor Unit Monitor Item:

T/M torque converter (possi- ble to be displayed by using the service mode on moni- tor) • If the circuit is shorted, overheating is displayed. (red zone) T3-9