hitachi — Travel System Troubleshooting

TROUBLESHOOTING / Troubleshooting B Faulty travel mode selec- tor switch or faulty har- ness. Connect connector in travel mode selector switch. Disconnect monitor unit connector 1-B in monitor unit. Check if voltages at terminals #B28, #B29, #B30 and #B31 of harness end of con- nector are 4V, 3V, 2V and 1V respectively. YES · As for the harness in travel mode selector switch, the harness which correct cur- rent does not flow through is faulty. Faulty monitor unit. · Key switch: ON NO T5-6-73