Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 5 - 12 Section 5 – Maintenance Procedures CFP83 Series Procedure 12 Test Run Engine Start Test Run Select the MANUAL position on the AUTO/MANUAL Switch. Press the CRANK A or CRANK B switch. Check Unusual Engine Noise Run the engine no less than 30 minutes to attain normal running temperature. During the weekly maintenance check, listen for any unusual engine noise which can indicate that service is required. Check running indications. Observe that the engine is operating at test speed as follows: Check that oil pressure is greater than 10 PSI. Check that coolant temperature is between 140°F and 212°F. Drawing No. 9777, Section 5, Rev. 02-07