Section 5 – Maintenance Procedures Page 5 - 25 CFP83 Series Procedure 25 Clean Charge Air Cooler If the engine experiences a turbocharger failure or any other occasion where oil or debris is put into the charge air cooler, the charge air cooler must be cleaned. Remove charge air cooler from the engine. Refer to Section 4. WARNING When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to avoid personal injury. CAUTION Do not use caustic cleaners to clean the charge air cooler. Damage to the charge air cooler will result.
Flush the charge air cooler internally with solvent in the opposite direction of normal airflow. Shake the charge air cooler and lightly tap on the end tanks with a rubber mallet to dislodge trapped debris. Continue flushing until all debris or oil is removed. Drawing No. 9777, Section 5, Rev. 02-07