Section 5 – Maintenance Procedures Page 5 - 29 CFP83 Series NOTE : Do not install the heat exchanger cap. The engine is to be operated without the cap for this process. Fill the system with a mixture of sodium carbonate and water (or a commercially available equivalent). NOTE : Use 0.5 kg [1.0 lb] of sodium carbonate for every 23 liters [6 gal] of water. Operate the engine for 5 minutes with the coolant temperature above 82°C [180°F]. Shut the engine off, and drain the cooling system. Fill the cooling system with clean water. NOTE : Be sure to vent the engine and aftercooler for complete filling. NOTE : Do not install the radiator cap or the new coolant filter. Drawing No.
9777, Section 5, Rev. 02-07 AUTO MANUAL