Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 5 - 42 Section 5 – Maintenance Procedures CFP83 Series Tensioner cap Tensioner arm Spring case Tensioner pulley Clearance gap Inspect the tensioner for evidence of the tensioner arm contacting the tensioner cap. If there is evidence of the two areas making contact, the pivot tube bushing has failed and the tensioner must be replaced. Procedure 33 Adjust Valve Lash Clearance Adjust Remove the air crossover tube from the engine if equipped. Disconnect the support clamps, hose clamp, and wastegate sensing line. Remove the crankcase vent tube and any other parts that would prevent removal of the valve cover. Drawing No. 9777, Section 5, Rev. 02-07