Page 7-8 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Belt Guard Removal/Installation (Cont) All Ensure that the engine and engine coolant is cool in order to avoid burns. Remove the engine coolant pressure cap, (Cummins Fire Power Part No.11407). CFP83-F10, F20, F30 Only Open the aftercooler coolant vent. All Drain the engine coolant system. Refer to Drain and Flush Coolant System in Section 5. Remove the Upper Engine Coolant Hose from the heat exchanger. Remove the Lower Engine Coolant and Fill Hose from the heat exchanger. Remove the Coolant Vent Hose from the heat exchanger. Drawing No. 9777, Section 7, Rev. 02-07