Section 7 – Adjustment, Repair, and Replacement Page 7-37 CFP83 Series Coolant Hose Removal/Installation (Cont) NOTE : If temperature does not stabilize, stop the engine and refer to Coolant Temperature Above Normal or Coolant Temperature Below Normal (Engine Running) in Troubleshooting Section 12. Check that engine operating temperature stabilizes between about 82 and 93 o C [180 and 200 o F]. Check that no coolant hoses are collapsed. When temperature has stabilized, stop the engine. WARNING Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap, (Cummins Fire Power Part No. 11407).
Heated coolant spray or steam can cause personal injury. Check the coolant level. Refer to Check Coolant Level in Section 5. Add coolant if necessary. Place the AUTO/MANUAL rocker switch in the AUTO position. Return the fire protection system to operating status. Drawing No. 9777, Section 7, Rev. 02-07