Page 7-56 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Coolant Thermostat Removal/Installation (Cont) Reinstall Thermostat and Shims Reinstall the shims and thermostats in the same order and position as found in the removal step. Continue to Install the Thermostat Housing. Install the Thermostat Housing Install a new thermostat gasket. Position the thermostat housing and belt tensioner over the thermostats and gasket. Make sure the gasket is aligned with the capscrew holes. Install the capscrews and finger-tighten. Install the water outlet connection. Tighten all capscrews. Torque Value: 24 N•m [212 in-lb] Drawing No. 9777, Section 7, Rev. 02-07