Page 7-76 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Engine Harness Removal/Installation (Cont) Drawing No. 9777, Section 7, Rev. 02-07 Follow-Up NOTE: Refer to Battery Removal/Installation in this section for detailed instructions for connecting the battery cable clamps. Connect the negative battery cable at Battery A. Connect the negative battery cable at Battery B. NOTE: Refer to Second Start in Section 3 for the suggested checks. Start the engine. Refer to Normal Local Starting Procedure in Section 3. Observe that the engine starts with no unusual noises or vibrations. Verify that the engine reaches operating temperature. Stop the engine.
Place the AUTO/MANUAL rocker switch in the AUTO position. Return the fire protection system to operating status.