Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 7-140 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Low Pressure Fuel Supply Lines Removal/Installation (Cont) Install [Piston Style Lift Pump] Install the fuel line to the lift pump and filter head. Use two wrenches to tighten the connection to the lift pump. Torque Value: 24 N•m [18 ft-lb] Injection Pump Supply Line Replacement Remove the bleed screw banjo fitting. Remove the supply line (Bosch® injection pump). NOTE : Replace the seals (1) in the fittings if the line is disassembled. Remove the supply line (Lucas CAV injection pump). The Lucas CAV pump has two fittings for the supply line.

Replace fitting sealing washers (1), and ferrules (2) each time they are removed. Torque Value: 32 N•m [24 ft-lb] NOTE : Replace the seals in the fittings if the line is disassembled. Engines rated at 2500 rpm and above require additional fuel line support. Install as illustrated. Torque Value: 24 N•m [18 ft-lb] Follow-Up Drawing No. 9777, Section 7, Rev. 02-07