Page 10-6 Section 10 – Maintenance Specifications CFP83 Series Cummins/Fleetguard® Filter Specifications General Information Fleetguard® is a subsidiary of Cummins Inc. Fleetguard® filters are developed through joint testing at Cummins and Fleetguard®. Fleetguard® filters are standard on new Cummins engines. Cummins Inc. recommends their use. Fleetguard® products meet all Cummins Source Approval Test standards to provide the quality filtration necessary to achieve the engine's design life. If other brands are substituted, insist on products that the supplier has tested to meet Cummins high-quality standards.
Cummins can not be responsible for problems caused by non-genuine filters that do not meet Cummins performance or durability requirements. Fuel Recommendations and Specifications Fuel Recommendations WARNING Do not mix gasoline, alcohol, or gasohol with diesel fuel. This mixture can cause an explosion. CAUTION Due to the precise tolerances of diesel injection systems, it is extremely important that the fuel be kept clean and free of dirt or water. Dirt or water in the system can cause severe damage to both the fuel pump and the fuel injectors. Use only number 2 diesel (ASTM no. 2D) fuel.
Any adjustment to compensate for reduced performance with a fuel system using alternate fuel is not warrantable. Additional information for fuel recommendations and specifications can be found in Fuel for Cummins Engines, Bulletin No. 3379001. See Section 8, Service Literature, for ordering information. Drawing No. 9777, Section 10, Rev. 02-07