Section 12 – Troubleshooting Page 12-9 CFP83 Series Coolant Contamination Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Coolant is rusty and has debris. Drain and flush the cooling system. Refer to Drain and Flush Cooling System in Section 5. If the drained coolant has excessive rust or debris, change the coolant more frequently or contact a Cummins Authorized Repair Facility. Otherwise, refill with correct mixture of antifreeze and water. Refer to Drain and Flush Cooling System in Section 5. Lubricating oil cooler is leaking oil into the coolant. Coolant begins to have the texture and color of chocolate pudding. Drain and flush the cooling system.
Refer to Drain and Flush Cooling System in Section 5. Check the lubricating oil cooler for coolant leaks and cracks. Refer to Lubricating Oil Cooler Removal/Installation in Section 7. Replace the oil cooler gasket or other parts. Refill with correct mixture of antifreeze and water. Refer to Drain and Flush Cooling System in Section 5. If the problem persists, the cylinder block may be cracked or porous. Refer to a Cummins Authorized Repair Facility.