Section 12 – Troubleshooting Page 12-11 CFP83 Series Excessive Coolant Loss Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction External engine leak is present at a seal, gasket, or draincock. Inspect the engine and its components for seal, gasket, or draincock leaks. Correct any leaks. Pressure cap is malfunctioning or has low-pressure rating. Inspect the pressure cap (Cummins Fire Power Part No. 11407). Refer to Radiator Pressure Cap (008- 047) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Cooling system hose is collapsed, restricted, or leaking. Inspect the hoses. Refer to Check Hose Condition in Section 5. Replace any damaged hoses.
Refer to Coolant Hose Removal/Installation in Section 7. Engine is overheating. Refer to the Coolant Temperature Above Normal symptom tree. Coolant is leaking into the lubricating oil. Check for coolant in the oil. Refer to the Coolant in the Lubricating Oil symptom tree in this section. Coolant is leaking into the combustion chamber. Remove the cylinder head, and inspect cylinder head, gasket, and pistons for evidence of coolant. Refer to Cylinder Head (002-004) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Refer to a Cummins Authorized Repair Facility.