Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-66 Section 12 – Troubleshooting CFP83 Series Engine Stops During Operation (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Clogged fuel tank air breather hole. Clean the fuel tank breather. Customer-supplied fuel pre-filter is clogged. Clean the fuel pre-filter. Fill and bleed the fuel lines to the engine. Fuel piping to engine is clogged. Clean and repair the fuel piping to the engine. The fuel filter is clogged. Replace the fuel filter. Refer to Change Fuel Filter in Section 5. Air is trapped in the low pressure fuel lines at the engine. Bleed the fuel lines. Refer to Air in Fuel in Section 7. The fuel lift pump is malfunctioning.

Check the fuel lift pump for correct operation. Check the pump output pressure. Replace the fuel lift pump if necessary. Refer to Fuel Lift Pump Removal/ Installation in Section 7. Fuel injection pump is malfunctioning. Replace the fuel pump. Refer to Fuel Injection Pumps, In-Line (005-012) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003- 02. Contact an Authorized Cummins Repair Facility.