Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 12 – Troubleshooting Page 12-67 CFP83 Series Engine Will Not Reach Rated Speed (RPM) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Load is excessive for engine horsepower rating. Reduce the engine load. Throttle adjustment is not correct. Check the throttle adjustment. Refer to instructions in Section 3. Fuel shutoff lever (mechanical) is partially engaged. Check for correct solenoid operation. Refer to Fuel Shutoff Valve (005-043) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Engine fuel leak is present. Check the fuel lines, fuel connections, fuel delivery valve seals, and fuel filters for leaks.

Check the fuel lines from the supply tank(s). Refer to Fuel Supply Lines (006-024) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Fuel pump return overflow valve is malfunctioning. Inspect the return overflow valve. Replace if necessary. Refer to Fuel Return Overflow Valve (006-044) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Tachometer is not calibrated. Compare the tachometer reading with a handheld tachometer or an electronic service tool reading. If out of calibration, calibrate the tachometer as necessary at the CAL adjustment on the back of the gauge.

Refer to Tachometer Calibration in Section 7.