Page 12-88 Section 12 – Troubleshooting CFP83 Series Lubricating Oil in the Coolant Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Bulk coolant supply is contaminated. Check the bulk coolant supply. Refer to Coolant Recommendations and Specifications in Section 10. Drain the coolant and replace with non-contaminated coolant. Refer to Drain and Flush Cooling System in Section 7. Replace the coolant filters. Refer to Change Coolant Filter in Section 7. Lubricating oil cooler is malfunctioning. Check the oil cooler. Refer to Lubricating Oil Cooler (007-003) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Cylinder head gasket is leaking.
Check the cylinder head gasket. Refer to Cylinder Head (002-004) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Cylinder head is cracked or porous. Remove intake and exhaust manifolds. Check for evidence of coolant leak. If necessary, operate engine at low idle. Pressure-test the cylinder head. Refer to Cylinder Head (002-004) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Cylinder block is cracked or porous. Inspect the cylinder block. Refer to Cylinder Block (001-026) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Contact a Cummins Authorized Repair Facility.