Section 12 – Troubleshooting Page 12-93 CFP83 Series Lubricating Oil Pressure is Low (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Lubricating oil suction or transfer tube is loose or broken, or the gasket or o-rings are leaking. Remove and inspect the oil pan or suction tube. Refer to Lubricating Oil Pan (007-025) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Main bearing capscrews are loose, worn or not tightened correctly. Check the torque on the main bearing capscrews. Inspect the capscrews for wear. Refer to Bearings, Main (001-006) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02.
Main bearings are damaged or worn, or the wrong bearings are installed. Inspect the main bearings for damage, excessive wear, and the correct part number. Refer to Bearings, Main (001-006) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Camshaft journals and number 1 bushing are severely damaged. Inspect the camshaft journals and number 1 bushing for wear. Refer to Camshaft Bushings (001-010) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Contact a Cummins Authorized Repair Facility.