Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-94 Section 12 – Troubleshooting CFP83 Series Oil Level Rises NOTE: Oil level may increase due to thermal expansion as the engine warms up and then decrease as the engine cools down. Slight variations due to temperature changes are normal. Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Excessive oil has been added to the engine. Drain the excess oil. Refer to Change Lubricating Oil and Filters in Section 7. Fuel is leaking into the oil system. Troubleshoot as per Lubricating Oil Contaminated in this section. Coolant is leaking into the oil system. Troubleshoot as per Lubricating Oil Contaminated in this section. Contact an Authorized Cummins Repair Facility.