Section 3 – Installation and Operation Page 3-37 CFP83 Series Rated Speed Setpoint Adjustment (CFP83-F10, F20, F30) NOTE : If required, use this section to adjust the normal operating speed to the nameplate value. NOTE : Rated speed is displayed on the Factory Setting Tag described in Section 2. FACTORY SETTING FACTORY SETTING ENGINE SPEED SETTING: OVERSPEED SWITCH SETTING: (@ HP SETTING) Start the engine. Observe that the engine starts and accelerates the currently adjusted speed setpoint. Adjust the speed setpoint to rated speed. NOTE : Rated speed is adjusted by locating the threaded linkage rod on the fuel pump side of the engine. Drawing No. 9777, Section 3, Rev. 02-07