Komatsu — 4.7.6.C CHECKING THE OIL LEVEL IN THE TRAVEL REDUCTION GEARS

MAINTENANCE PLAN 4.7.6.c CHECKING THE OIL LEVEL IN THE TRAVEL REDUCTION GEARS 168 WARNING 1 • As soon as the machine has been stopped the oil is very hot; let it cool down until it reaches 40-45°C (104-113°F) before carrying out the check. 1 This check must be carried out on each reduction gear posi- tioned with the level plugs (1) on the horizontal axis and the drain plug (2) downward. If necessary, move the machine slightly until reaching the re- quired position, which must absolutely be respected in order to carry out a precise check. This check is visual: the oil must reach the holes (1); otherwise, top up using the prescribed oil. (See “4.3 FUEL, COOLANT AND LUBRICANTS”).

Use a 5 mm setscrew spanner. 2 RWA06230 2 RWA06230