(2) Motor pressure is low. The motor displacement is large (low speed displacement) as shown figure. The two-speed spool is on the left position if Pin pressure is high. Then, Pm1 and Pm2 are shuttled by the spool. If the motor pressure is higher and keeps the following condition, the spool stays on the left position. Ps Ч Ap Am Ч Pin+Kx Motor load pressure acting area(Am) Pilot pressure oil Motor load pressure chamber Oil passage A Pilot pressure oil chamber Drain Dr1 Drain Dr2 Oil passage B Pm2 : Motor pressure Spool movement direction (2 speed at motor high pressure condition) Pm1 : Motor pressure Pin : Motor load pressure 8007A2TM13 2-67