Kaiyi — 4. MECHATRONICS SYSTEM

GROUP 4 MECHATRONICS SYSTEM 1. ALL ACTUATORS SPEED ARE SLOW Boom, Arm, Bucket, Swing and travel speed are slow, but engine speed is good. Spec : P-mode 1750 ± 50 rpm S -mode 1650 ± 50 rpm E-mode 1550 ± 50 rpm Before carrying out below procedure, check all the related connectors are properly inserted and fault code on the cluster. 1) INSPECTION PROCEDURE Wiring diagram MCU FUSE EPPR POWER 24V 8 No.6 PUMP EPPR+ 9 PUMP EPPR- 10 PUMP EPPR VALVE 9 GROUND(EPPR) 18 10 CN-52 CN-1 CN-75 900L6MS01 6-40 YES YES Check pressure at EPPR valve NO Check electric current at EPPR NO SPEC : 2~25 kgf/cm2 valve See TEST 3 SPEC :

100~700 mA See TEST 2 eck if HCESPN NO active fault play on the LCD YES Check resistance YES at EPPR valve SPEC : 15~25Ω(20˚C) See TEST 1 NO Cause Remedy Defective hydraulic system Defective EPPR valve Defective MCU Short circuit or poor connection between CN-52 -CN-75 Defective EPPR valve Replace Replace Check & repair wire harness or between CN-52 -CN-75 Replace 1 2